Casting and Forming Technology
Code | Completion | Credits | Range | Language |
---|---|---|---|---|
2331506 | Z,ZK | 5 | 3P+2C | Czech |
- Course guarantor:
- Lecturer:
- Tutor:
- Supervisor:
- Department of Manufacturing Technology
- Synopsis:
-
Principles of selection of the manufacturing method for semi-finished products. Production planning and production processes in the foundry. Production processes for forgings,extrusion. Accuracy, stock material, utilized equipment. Production processes for stampings. Manufacturing of stampings, presses and equipment. Plastic mouldings. Individual projects for production of a casting, forging or a stamping.
- Requirements:
-
Technology I
- Syllabus of lectures:
-
1. Principles of selection of the manufacturing method for semi-finished products by the sheet and bulk forming
2. Production processes for the stampings.Manufacturing of stampings, presses and equipment
3. Production processes for forgings , extrusion. Accurancy, stock material, utilized equipment
4. Principles of selection of the manufacturing method for casting
5. Production planning and production processes in the foudry
6. Proposal for the composition of cast irons. Structural diagramsand the evaluation criteria.
7. Examples of design allowances, drafts, patterns and core boxes.
8. Examples of design and calculation of the gating system and feeders.
9. Molding mixtures for production foundry molds and cores.
10. Methods of compaction and hardening of foundry molds and cores.
11 Foundry melting furnace. Calculation of the charge, and necessary capacity of melting furnaces.
12.Methods of heat treatment, inspection and finishing of castings.
- Syllabus of tutorials:
-
Individual projects for production of casting, forging or stamping
- Study Objective:
-
acquire design of special tools, create process sheets and teach planning procedure
- Study materials:
-
- Vígner, M.-Zelenka, A.-Král, M.: Metodika projektování výrobních procesů. SNTL/ALFA,1984, - Zelenka, A.- Král,M.:Projektování výrobních systémů.Vydavatelství ČVUT Praha, 1995,
- Kotouč, J. a kol.: Tvářecí nástroje,Vydavatelství ČVUT Praha, 1993,
- Král, M.: Projektování výrobních procesů I.Vydavatelství ČVUT Praha, 1992
- Note:
- Further information:
- http://u12133.fsid.cvut.cz/?udaj=predmet&id=C31506
- No time-table has been prepared for this course
- The course is a part of the following study plans:
-
- 16 80 85 00 BVES TVA 2012 P základ (compulsory course in the program)
- 20 86 90 00 BVES TVA 2012 K základ (compulsory course in the program)
- 13 80 85 00 DVES 2012 P úvodní studijní plán (compulsory course in the program)
- 16 80 85 00 DVES TVA 2012 P (compulsory course in the program)